Hybrid cyclotriphosphazene–polysiloxane–nano-SiO2 composites with improved mechanical properties

Starting from the functional cyclotriphosphazene, polysiloxane and nano-SiO₂ precursors, three new hybrid nanocomposites with reinforced mechanical properties were prepared. Young’s modulus values for all the composite samples are similar in the range of 7–11 MPa, stress at fracture increases with the nano-SiO₂ content increase in the material and reaches a maximum value of 36 MPa for the composite with 20% nano-SiO₂. The nanocomposites investigated are elastic and demonstrate the ability to be deformed without failure up to 54% strain.     

Efficient Piezoelectric Energy Harvesting from a Discrete Hybrid Bismuth Bromide Ferroelectric Templated by Phosphonium Cation

Bismuth containing hybrid molecular ferroelectrics are receiving tremendous attention in recent years owing to their stable and non-toxic composition. However, these perovskite-like structures are primarily limited to ammonium cations. Herein, we report a new phosphonium based discrete perovskite-like hybrid ferroelectric with a formula [Me(Ph)₃P]₃[Bi₂Br₉] ( MTPBB ) and its mechanical energy harvesting capability. The Polarization-Electric field (P-E) measurements resulted in a well-defined ferroelectric hysteresis loop with a remnant polarization value of 2.1 μC cm⁻². Piezoresponse force microscopy experiments enabled visualization of the ferroelectric domain structure and evaluation of the piezoelectric strain coefficient (d₃₃) for an MTPBB single crystal and thin film sample. Furthermore, flexible devices incorporating MTPBB in polydimethylsiloxane (PDMS) matrix at various concentrations were fabricated and explored for their mechanical energy harvesting properties. The champion device with 20 wt % of MTPBB in PDMS rendered a maximum peak-to-peak open-circuit voltage of 22.9 V and a maximum power density of 7 μW cm⁻² at an optimal load of 4 MΩ. Moreover, the potential of MTPBB -based devices in low power electronics was demonstrated by storing the harvested energy in various electrolytic capacitors.     

汽配件颜色喷涂顺序问题的TSP转化与建模

汽配件颜色喷涂顺序问题通常以生产线上相邻汽配件颜色切换次数少为最优目标,以进一步降低生产成本.该类问题具有所有汽配件都必须喷涂一次且只喷涂一次的特点,为此提出了TSP转化与建模的方法.将待喷涂汽配件定义为TSP顶点,任意两个待喷涂汽配件的颜色切换定义为顶点的距离,仿照TSP问题构建0-1规划模型;类似于顶点距离,将某些汽配件的颜色或类别不相邻要求定义为0-1矩阵,巧妙地构造了喷涂生产的约束条件.该建模方法简单快速,通用性高,适用于具有类似特点的各类生产实践问题.     

“联用技术及元素形态”国际课程探索与实践*

充分利用线上教学的优势,对化学院本科生开设了“联用技术及元素形态”国际课程,避免了传统教学中组织、协调外籍/外地专家资源过程中必要的各种消耗,极大程度地整合教学资源、改善教学效果。在该课程的探索与实践过程中,学生们对痕量元素形态及基于等离子体质谱的各种联用技术产生了极大的兴趣,激发了他们的主动学习热情;教师之间及师生之间的沟通趋向更简单、更灵活、更实时,为后续线上线下混合式国际课程建设提供了良好的基础和借鉴。     

Spectrum of Single-Photon Scattering in a Strong-Coupling Hybrid Optomechanical System

The single-photon excitation and transmission spectra of strong-coupling hybrid optomechanics are theoretically analyzed, where a two-level system (TLS) is coupled to a mechanical resonator (MR), generating Jaynes–Cummings-type polariton doublets. In this model, both the optomechanical coupling and the TLS-MR coupling are strong. In this parameter region, polaron-assisted excitation reemission processes can strongly affect the single-photon excitation and output spectra of the cavity. It is found that the fine structure around each sideband can be used to characterize the TLS-MR and the effective TLS-photon couplings, even at the single-quantum level. Thus, the spectrum structures may make it possible to sensitively probe the quantum nature of a macroscopic mechanical element. A possible approach for tomographic reconstruction of the state of a TLS, utilizing the single-photon transmission spectra, is further provided.     

Impact of anisotropic slip on the stagnation-point flow past a stretching/shrinking surface of the Al_2O_3-Cu/H_2O hybrid nanofluid

The characteristics of heat transfer in the three-dimensional stagnationpoint flow past a stretching/shrinking surface of the Al_2O_3-Cu/H_2O hybrid nanofluid with anisotropic slip are investigated. The partial differential equations are converted into a system of ordinary differential equations by valid similarity transformations. The simplified mathematical model is solved computationally by the bvp4c approach in the MATLAB operating system. This solving method is capable of generating more than one solutions when suitable initial guesses are proposed. The results are proven to have dual solutions, which consequently lead to the application of a stability analysis that verifies the achievability of the first solution. The findings reveal infinite values of the dual solutions at several measured parameters causing the non-appearance of the turning points and the critical values. The skin friction increases with the addition of nanoparticles, while the escalation of the anisotropic slip effect causes a reduction in the heat transfer rate.